Sinotruk D7W U-shape Dump Truck will be sent to Philippines Manila

Philippines customer have purchased our products before. This time, when a Philippines customer needed a sinotruk dump truck, the customer found us. Our sales manager warmly received him and provided professional opinions and suggestions for Philippines customer. Philippines customer ordered the sinotruk  d7w u-shape dump truck.

Now, this sinotruk d7w u-shape dump truck has been packaged and sent to the port, and it is believed that it will soon be delivered to customer in the Philippines.

Sinotruk D7W U-shape Dump Truck will be sent to Philippines Manila

Inspection of the hydraulic system

The main difference between dump trucks and general vehicles is the lifting function. The hydraulic cylinder is very important, so it is very important to check the hydraulic system.

(1) Check the hydraulic oil volume of the dump truck, replenish it in time if it is insufficient, check whether the hydraulic system is damaged or leak, and deal with it in time if necessary;

(2) Pay attention to and check whether the connection and tightening of the hydraulic cylinder of the dump truck, the connecting rod mechanism and other components are reliable. Observe whether each moving part and its adjacent fixed parts are abnormally damaged or deformed;

(3) Check the integrity of the dump truck compartment, sub-frame, spare tire frame, etc., and pay special attention to checking whether the welding seam has open welding, cracks, etc.;

Sinotruk D7W U-shape Dump Truck will be sent to Philippines Manila

(4) Check the working or wear condition of moving parts such as gear pump, power take-off, hydraulic cylinder, etc. of dump truck, and carry out maintenance, repair and replacement of wearing parts.

In addition, daily maintenance is also very important. Regularly check the following items of the dump truck every week or after every 50 hours of work: Check all the air and oil lines of the dump truck for leaks, replace damaged hoses in time; check all bolts , Whether the nut is loose, if so, it needs to be tightened in time to check whether the valve and hydraulic cylinder on the vehicle are dirty, if so, it needs to be cleaned; each oil filling point must be filled with oil once to ensure the normal operation of the vehicle; check the skids and rubber pads Or the case of the rubber pad belt, if it is aging, it must be replaced in time.

Maintenance of the sinotruk u-shape dump truck

For the maintenance and maintenance of dump trucks, we should also pay attention to the following points:

(1) The high-pressure hose of the dump truck must be replaced every two years. If the hose is found to be cracked and damaged or partially expanded, it should be replaced in time;

(2) Always check whether there is air leakage or oil leakage in the dumping mechanism of the dump truck. When filling hydraulic oil, check whether the filter screen installed at the filling port is damaged, and replace it if necessary to avoid the mixing of impurities, which will accelerate the wear of hydraulic components or cause early damage. It is strictly forbidden to mix different grades of hydraulic oil and add hydraulic oil that does not meet the requirements of the manual.

(3) Always check whether the engagement and separation of the power take-off and gear pump of the dump truck are normal, so as to avoid the accidental lift of the carriage due to incomplete separation. In the working state, you should also pay attention to whether there are abnormal phenomena such as abnormal noise or high temperature in the vehicle, and remove them in time if necessary to avoid premature damage to the power take-off, gear pump, and valves.

Sinotruk D7W U-shape Dump Truck will be sent to Philippines Manila